IPM 80B V400 Động cơ Motor Nerimotori, Nerimotori Viet Nam
Model: IPM 80B V400
Hãng: Nerimotori Viet Nam
ĐẶC TÍNH KỸ THUẬT:
Công suất: 1,1 Kw
Nguồn điện : 400 V
3 pha, 6 cực
Tần số: 75 [Hz]
Nhiệt độ: -15 ~ +40 [°C]
Hotline: 0933.911.903
Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!
IPM 80B V400
BRUSHLESS SYNCHRONOUS MOTORS
Energy efficiency, reliability and high performance in a single product.
The PM IE4 motor makes it possible to obtain a return on the initial investment after few months from its start-up, as electricity consumption decreases compared to an IE1 motor.
In addition to having these real economic savings, the use of IE4 motors increases the reliability and performance of the entire system.
TECHNICAL FEATURES
IPM 80B 1,1-2,2kW 400V IE4 THREE-PHASE 400V INVERTER POWER SUPPLY MOTOR IC411 (self-ventilated) 1,1 kW 2,2 kW Description Symbol Units of measure Nominal Speed 1500 RPM 3000 RPM Frequency f [Hz] 75 150 Number of Poles 2p 6 6 Maximum No-load speed n_max [RPM] 2800 5000 Constant voltage Ke [V_rms/KRPM] 172,7 86,7 Constant torque Kt [Nm/A_rms] 2,8 1,4 Rated torque Cnom [Nm] 7,0 7,0 Rated current Inom [A_rms] 2,5 5,0 Efficiency η [%] 87,2 88,0 Maximum torque Cmax [Nm] 9,5 8,4 Maximum torque current Imax [A_rms] 3,3 6,1 Minimum switching requency f_switch [kHz] 4 4 Phase resistance @T_amb Rs [Ω] 9,2 2,4 Direct axis inductance Ld [mH] 41,2 9,0 Quadrature axis inductance Lq [mH] 66,8 16,2 Magnetic flux ϕe [mWb] 0,44 0,22 Motor weight P [kg] 9 Room temperature T_amb [°C] -15 ÷ 40 IP degree of protection IP 55 Insulation class F Overtemperature Dt [°C] 30 28 Type of service S1
OPERATING TORQUE CURVE 1,1KW - 1500 RPM
OPERATING POWER CURVE 1,1KW - 1500 RPM
OPERATING TORQUE CURVE 2,2KW - 3000 RPM
OPERATING POWER CURVE 2,2KW - 3000 RPM
Energy efficiency, reliability and high performance in a single product.
The PM IE4 motor makes it possible to obtain a return on the initial investment after few months from its start-up, as electricity consumption decreases compared to an IE1 motor.
In addition to having these real economic savings, the use of IE4 motors increases the reliability and performance of the entire system.
TECHNICAL FEATURES
| IPM 80B 1,1-2,2kW 400V IE4 | ||||
| THREE-PHASE 400V INVERTER POWER SUPPLY | ||||
| MOTOR IC411 (self-ventilated) | 1,1 kW | 2,2 kW | ||
| Description | Symbol | Units of measure | Nominal Speed | |
| 1500 RPM | 3000 RPM | |||
| Frequency | f | [Hz] | 75 | 150 |
| Number of Poles | 2p | 6 | 6 | |
| Maximum No-load speed | n_max | [RPM] | 2800 | 5000 |
| Constant voltage | Ke | [V_rms/KRPM] | 172,7 | 86,7 |
| Constant torque | Kt | [Nm/A_rms] | 2,8 | 1,4 |
| Rated torque | Cnom | [Nm] | 7,0 | 7,0 |
| Rated current | Inom | [A_rms] | 2,5 | 5,0 |
| Efficiency | η | [%] | 87,2 | 88,0 |
| Maximum torque | Cmax | [Nm] | 9,5 | 8,4 |
| Maximum torque current | Imax | [A_rms] | 3,3 | 6,1 |
| Minimum switching requency | f_switch | [kHz] | 4 | 4 |
| Phase resistance @T_amb | Rs | [Ω] | 9,2 | 2,4 |
| Direct axis inductance | Ld | [mH] | 41,2 | 9,0 |
| Quadrature axis inductance | Lq | [mH] | 66,8 | 16,2 |
| Magnetic flux | ϕe | [mWb] | 0,44 | 0,22 |
| Motor weight | P | [kg] | 9 | |
| Room temperature | T_amb | [°C] | -15 ÷ 40 | |
| IP degree of protection | IP | 55 | ||
| Insulation class | F | |||
| Overtemperature | Dt | [°C] | 30 | 28 |
| Type of service | S1 | |||
OPERATING TORQUE CURVE 1,1KW - 1500 RPM
OPERATING POWER CURVE 1,1KW - 1500 RPM
OPERATING TORQUE CURVE 2,2KW - 3000 RPM
OPERATING POWER CURVE 2,2KW - 3000 RPM
Không có nhận xét nào:
Đăng nhận xét