UV 3.0 ATEX Van Điều Khiển Áp Suất UV 3.0 ATEX, Mankenber Viet Nam

Van Điều Khiển Áp Suất UV 3.0 ATEX,UV 3.0 ATEX Mankenber Viet Nam 

Model: UV 3.0 ATEX

Hãng: MANKENBERG

Kết nối DN: 15-50
Kết nối G: 1/2 - 2
Áp suất danh nghĩa PN: 1
Áp suất đầu vào *: 0,002 - 0,52 bar
Kvs-value: 0,2 - 3,6 m³ / h
Nhiệt độ: 130 ° C

Hotline: 0933.911.903

Mail: thietbicongnghiepltt@gmail.com

Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!

PRESSURE CONTROL
Back pressure regulators UV 3.0 ATEX
Millibar control valve

Technical data

Connection DN 15 - 50
Connection G 1/2 - 2
Nominal pressure PN 1
Inlet pressure* 0.002 - 0.52 bar
Kvs-value 0.2 - 3.6 m³/h
Temperature 130 °C
Medium liquids and gases
*RT = -10 °C up to + 50 °C

Description

Self-acting back pressure regulators are simple control valves offering accurate control while being easy to install and maintain. They control the pressure upstream of the valve without requiring pneumatic or electrical control
elements.
The UV 3.0 ATEX backpressure regulator is a diaphragm-controlled springloaded proportional control valve for very small outlet pressures and medium
volumes. This backpressure regulator is manufactured from deep-drawn
stainless steel featuring excellent corrosion resistance.The valve cone is fitted with a soft seal.
The inlet pressure to be controlled is balanced across the valve seat by the
force of the valve spring (set pressure). If the inlet pressure rises above the
set pressure, the valve opens. With decreasing inlet pressure the valve control orifice reduces, when the pipeline is depressurised, the valve is closed.
Rotating the adjusting screw clockwise increases the inlet pressure.
The valve requires a sense line (to be installed on-site).
These valves are no shut-off elements ensuring a tight closing of the valve.
In accordance with DIN EN 60534-4 and/or ANSI FCI 70-2 they may feature
a leakage rate in closed position in compliance with the leakage classes V.

Standard

» All stainless steel construction
» Sense line connection
Special features of the ATEX version
» Conformity to ATEX Directive 2014/34 / EU and DIN EN ISO 80079-36
» Leakage line connection, adjusting screw seal and lock
» Potential equalization among the valve components
» Secured body connections
» Grounding lug at the valve body
» Electrically conductive components

Options

» Pressure gauge connection
» KVSreduction
» Vacuum resistant design
» Different materials for diaphragms and seals, suitable for your medium
» Special connections: Aseptic, ANSI or JIS flanges, NPT, welding ends,
other connections on request
» Special designs on request

Technical specification

ATEX marking

Ex II 2G Ex h IIB 85°C...130°C Gb X

Kvs values [m3/h] for all body sizes
0.2	0.9	1.5	2.2	2.8	3.6

Setting ranges [bar]	diaphragm [mm]
0.002 - 0.004	0.003 - 0.015	ø 500
0.004 - 0.010	0.005 - 0.032	ø 360
0.008 - 0.016	0.015 - 0.065	0.05 - 0.28	ø 270
0.015 - 0.03	0.025 - 0.125	0.1 - 0.52	ø 220

Materials*
Body	stainless steel
Bonnet	stainless steel
Internals	stainless steel
Screws	stainless steel
Set screw	stainless steel M10 with handwheel
Spring	stainless steel
Valve seal	FKM
Diaphragm	EPDM
Protective foil for diaphragm	PTFE conductive

Dimensions [mm]
Size	nominal diameter
DN 15	DN 20	DN 25	DN 32	DN 40	DN 50
A*	165	170	170	180	180	180
B	35	35	35	40	45	50
C	320	330	330	340	350	360
D	diaphragm diameter see table setting ranges

Dimensions [mm]
Size	nominal diameter
G 1/2	G 3/4	G 1	G 1 1/4	G 1 1/2	G 2
A1*	240	240	250	250	260	260
B	35	35	35	40	45	50
C	320	330	330	340	350	360
D	diaphragm diameter see table setting ranges

*overall length tolerances in acc. with DIN EN 558

Weights [kg]
Diaphragm diameter mm	nominal diameter
G 1/2 - 2	DN 15 - 25	DN 32 - 50
ø 500	13	15	17
ø 360	12.5	14.5	16.5
ø 270	8	10	12
ø 220	6	8	10