790050 82000 Bộ truyền động van 4G Ghidini, 4G Ghidini Viet Nam

790050 82000 Bộ truyền động van 4G Ghidini, 4G Ghidini Viet Nam

Model: 790050 82000 

Hãng: 4G GHIDINI

ĐẶC TÍNH KỸ THUẬT:

Nhiệt độ: -20°+80°C

Áp suất: liên tục 8 bar/120 psi 

            – tối đa 10 bar/142 psi.

Phạm vi quay: +/- 5°.

Tipo: AP 075

Hotline: 0933.911.903

Mail: thietbicongnghiepltt@gmail.com

Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!

790050_DOUBLE EFFECT PNEUMATIC ACTUATOR_ALUMINIUM

DOUBLE EFFECT PNEUMATIC ACTUATOR IN ALUMINIUM NICKEL – 90°

•ENAW 6063 T6 extruded Aluminium Body, inside surface finish Ra=0,4-0,6 and treatment of Nickel plating.
•ENAB 46100 T6 die-casted Aluminium alloy Pistons, 15 micron Anodizing.
•ENAB 46100 T6 die-casted Aluminium alloy Covers Nickel plated.
•Carbon steel Shaft, 20 micron Nickel plated.
•Screws in Stainless Steel AISI 304 (A2).
•Seals in nitrile nubber NBR.
•LAT-LUB low friction sliding Bearings.
•High performances Syntetic Grease.

•Double lower drilling for valve fastening and centering according to ISO 5211-DIN 3337 standards.
•Double square lower female shaft key (starlike) according to ISO 5211-DIN 3337 standards to assembly on valves with square key on line (0°) and diagonal key (45°).
•Solenoid connections according to NAMUR VDIVDE-3845 standards.
•Top drilling for accessories fastening, and upper shaft end according to NAMUR VDIVDE-3845 standards.
•3D position indicator.
•Aluminium adhesive nameplates with progressive serial number punched.
•Lubrification guaranteed for min. 1.000.000 operations.
•Running test and 100% seal test carried out with electronic equipment and certification of each individual product.
•According to ATEX 2014/34/UE Standard for explosive environnement; STANDARD version actuator: II 2GD c Tmax = 95°C.
•According to EN 15714-3 design and manufacture standard requirements.

USE:
AIR SUPPLY: dry or lubricated filtered compressed air.
TEMPERATURE RANGE: -20°+80°C
FEEDING PRESSURE: 8 bar/120 psi continuous – 10 bar/142 psi maximum.
TURNING ROTATION RANGE: +/- 5°.
STANDARD ROTATION: counterclockwise.

TIPO	1 BAR	2 BAR	3 BAR	4 BAR	5 BAR	6 BAR	7 BAR	8 BAR	9 BAR	10 BAR	CODE
AP 032	-	-	-	5	6,3	7,6	8,8	10	11,4	12,6	790050 80500  3D
AP 042	-	-	6,5	8,7	10,9	13	15,2	17,3	19,5	21,7	790050 80700  3D
AP 050	3	6,1	9,2	12,3	15,4	18,5	21,5	24,6	27,7	30,8	790050 81000  3D
AP 063	5,5	11	16,5	22	27,5	33	38,5	44	49,5	55	790050 81600  3D
AP 075	11,7	23,4	35,1	46,8	58,5	70,2	81,9	93,6	105	117	790050 82000  3D
AP 085	17,8	35,6	53,4	71,2	89	107	125	142	160	178	790050 82500  3D
AP 100	27,7	55,4	83,2	111	139	166	194	222	250	277	790050 83000  3D
AP 115	45,7	91,5	137	183	229	275	320	366	412	458	790050 83500  3D
AP 125	60,1	120	181	241	301	361	421	481	542	602	790050 84000  3D
AP 145	86,7	173	260	347	434	520	607	694	780	867	790050 84500  3D
AP 160	118	237	355	473	592	710	828	947	1065	1183	790050 85000  3D

ACTUATOR TORQUE IN Nm

POSIZIONE	AP 032	AP 042	AP 050	AP 063	AP 075	AP 085	AP 100	AP 115	AP 125	AP 145	AP 160	AP 180
A-90°	100	139	139	152	205	230	275	309	360	392	462	482
B	45	57	68	83,5	100	110	125	142	155	175	196	220
C	49	60,5	75	86	94	104	120	134	141	163	176	196
D x E	-	-	-	-	105 x 22	105 x 22	105 x 22	139 x 22	139 x 22	139 x 22	139 x 22	139 x 22
F x G	50 x 25	80 x 30	80 x 30	80 x 30	80 x 30	80 x 30	80 x 30	130 x 30	130 x 30	130 x 30	130 x 30	130 x 30
L	23,5	27	33,5	38	42,5	49	55	63,5	69,5	80	88	98
M	25,5	33,5	41,5	48	51,5	55	65	70,5	71,5	83	88	98
Port.A-Port.B DIN259	1/8" GAS	1/8" GAS	1/8" GAS	1/4" GAS	1/4" GAS	1/4" GAS	1/4" GAS	1/4" GAS	1/4" GAS	1/4" GAS	1/4" GAS	1/4" GAS
N x O	8 x 12	8 x 12	8 x 12	8 x 12	14 x 18	14 x 18	14 x 18	27 x 36	27 x 36	27 x 36	27 x 36	32 x 42
P	20	20	20	20	20	20	20	30	30	30	50	50
Q x I	9 x 10	9 x 10	9 x 10	9 x 10	11 x 13	14 x 16	14 x 16	17 x 20	17 x 20	22 x 25	22 x 25	27 x 30
		11 x 13	11 x 13	11 x 13	14 x 16	17 x 20	17 x 20	22 x 25	22 x 25	27 x 30	27 x 30	36 x 39
				14 x 16	17 x 20		22 x 25		27 x 30
F.ISO 5211	F03	F04	F04	F05	F05 / 07	F05 / 07	F07 / 10	F07 / 10	F07 / 10	F10 / 12	F10 / 12	F10 / 12

POS.	DENOMINATION	PCS	MAT.
1	Body	1	ENAW 6063 T6
2	Pistone	2	ENAB 46100 T6
3	Cover	2	ENAB 46100 T6
4	Pinion	1	ASTM A105
5 *	Chiavetta Antiespulsione	2	Resina Acetalica - Acetalic resin
6 *	O-Ring inferiore pignone	1	NBR
7 *	O-Ring inferiore pignone	1	NBR
10 *	seeger	1	Acciaio per molle - Spring steel
12 *	Piston O-Ring	2	NBR
13 *	Piston anti-friction ring	2	Resina Acetalica - Acetalic resin
14 *	Cover Seal	2	NBR
15	Identification plate	1	Alluminio - Aluminium
16	Cover fixing screw	8	AISI 304 (A2)
17	Nut	4	AISI 304 (A2)
18	Washer	4	AISI 304 (A2)
19 *	O-ring	4	NBR
21	Cover screw	2	AISI 304 (A2)
23 *	Pinion thrust washer	1	AISI 304 (A2)
24 *	Anti-friction washer	1	Resina Acetalica - Acetalic resin
25 *	Inferior pinion guide ring	1	Resina Acetalica - Acetalic resin
26 *	Superior pinion guide ring	1	Resina Acetalica - Acetalic resin
27 *	Piston anti-friction pad	2	Resina Acetalica - Acetalic resin
28	Piston screw	2	AISI 304 (A2)
*	spares kit