ELR H5-IES-SC- 24DC/500AC-9 - 2900421 PHOENIX CONTACT

• ELR H5-IES-SC- 24DC/500AC-9 - 2900421
Model: ELR H5-IES-SC- 24DC/500AC-9 - 2900421

Hãng: PHOENIX CONTACT

Bộ Khởi Động Động Cơ

Ngõ vào: Điều khiển Trái / Phải

Nguồn cấp: 24 VDC

Dãi dòng điện: 1.5 A ... 9 A

• 

  • Hotline: 0933.911.903 (Ms.Nhi)

    Mail: thietbicongnghiepltt@gmail.com

    Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!

  
  

• Bộ khởi động động cơ - đảo chiều trái phải

  ELR H5-IES-SC- 24DC/500AC-9 - 2900421

  Dimensions

  Width	22.5 mm
  Height	107 mm
  Depth	114 mm

  Back to top

  Ambient conditions

  Ambient temperature (operation)	-25 °C ... 70 °C (observe derating)
  Ambient temperature (storage/transport)	-40 °C ... 80 °C
  Maximum altitude	≤ 2000 m
  Degree of protection	IP20

  Back to top

  Device supply

  Rated control circuit supply voltage US	24 V DC
  Control supply voltage range	19.2 V DC ... 30 V DC
  Rated control supply current IS	40 mA
  Type of protection	Surge protection
  	Reverse polarity protection

  Back to top

  Input data

  Input name	Control input right/left
  Rated actuating voltage UC	24 V DC
  Triggering voltage range	19.2 V DC ... 30 V DC
  Rated actuating current IC	5 mA (Input type 1)
  Switching threshold	9.6 V (“0” signal)
  	19.2 V (“1” signal)
  Switching level	< 5 V DC (For EMERGENCY STOP)
  Typical turn-off time	< 30 ms
  Type of protection	Reverse polarity protection

  
  

  Output name	AC output
  Rated operating voltage Ue	500 V AC
  Operating voltage range	42 V AC ... 550 V AC
  Rated operating current Ie	9 A (AC-51)
  	6.5 A (AC-53a)
  Mains frequency	50/60 Hz
  Load current range	1.5 A ... 9 A (see to derating)
  Trigger characteristic in acc. with IEC 60947-4-2	Class 10A
  Cooling time	20 min. (for auto reset)
  Leakage current	0 mA
  Type of protection	Surge protection

  Back to top

  Output data reply output

  Output name	Acknowledge output
  Note	Confirmation: floating change-over contact, signal contact
  Contact type	1 changeover contact
  Switching capacity according to IEC 60947-5-1	3 A (230 V, AC15)
  	2 A (24 V, DC13)

  Back to top

  Overspeed tripping

  Operate threshold	> 45 A
  Response time	< 2 s

  Back to top

  General

  Motor starter type	Reversing starter
  Switching frequency	≤ 2 Hz (Load-dependent)
  Mounting position	vertical (horizontal DIN rail, motor output below)
  Mounting type	DIN rail mounting
  Assembly instructions	alignable, for spacing see derating
  Operating mode	100% operating factor
  Maximum power dissipation	14.6 W
  Minimum power dissipation	1.1 W
  Operating voltage display	Green LED
  Status display	Yellow LED
  Indication	Red LED

  Back to top

  Connection data

  Connection name	Control circuits
  Connection method	Screw connection
  Stripping length	8 mm
  Screw thread	M3
  Conductor cross section solid	0.2 mm² ... 2.5 mm²
  Conductor cross section flexible	0.2 mm² ... 2.5 mm²
  Conductor cross section AWG	24 ... 14
  Torque	0.5 Nm ... 0.6 Nm
  	5 lbf-in. ... 7 lbf-in.

  Back to top

  Connection data 2

  Connection name	Load circuit
  Connection method	Screw connection
  Stripping length	8 mm
  Screw thread	M3
  Conductor cross section solid	0.2 mm² ... 2.5 mm²
  Conductor cross section flexible	0.2 mm² ... 2.5 mm²
  Conductor cross section AWG	24 ... 14
  Torque	0.5 Nm ... 0.6 Nm
  	5 lbf-in. ... 7 lbf-in.

  Back to top

  Insulation characteristics

  Rated insulation voltage	500 V
  Rated surge voltage	6 kV
  Overvoltage category	III
  Degree of pollution	2
  Designation	Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit
  Insulation	Safe isolation (IEC 60947-1/EN 50178) at operating voltage ≤ 300 V AC
  	Basic isolation (IEC 60947-1) at operating voltage 300 ... 500 V AC
  	Safe isolation (EN 50178) at operating voltage 300 ... 500 V AC
  Designation	Isolation characteristics between the control input and control supply voltage to auxiliary circuit
  Insulation	Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC
  	Safe isolation (EN 50178) in the auxiliary circuit ≤ 300 V AC

  Back to top

  Standards and Regulations

  Designation	Standards/regulations
  Standards/regulations	IEC 60947-1
  	IEC 60947-4-2
  	IEC 61508
  	ISO 13849

  Back to top

  Conformance/approvals

  Designation	ATEX
  Identification	 II (2) G [Ex e] [Ex d] [Ex px]
  	 II (2) D [Ex t] [Ex p]
  Certificate	PTB 07 ATEX 3145
  Designation	UL approval
  Certificate	NLDX.E228652
  Designation	Safety Integrity Level (SIL, IEC 61508)
  Identification	≤ 3
  Additional text	Safe shutdown
  Designation	Safety Integrity Level (SIL, IEC 61508)
  Identification	2
  Additional text	Motor protection
  Designation	Performance Level (ISO 13849)
  Identification	≤ e
  Additional text	Safe shutdown
  Designation	Category (ISO 13849)
  Identification	≤ 3
  Additional text	Safe shutdown

  Back to top

  UL data

  SCCR	100 kA (500 V AC (fuse: 30 A class CC/30 A class J (high fault)))
  	5 kA (500 V AC (fuse: 20 A RK5 (standard fault)))
  FLA	6.5 A (500 V AC)
  Group installation	20 A (class RK5, SCCR 5kA, #24 - 14 AWG max. solid and stranded)
  	30 A (class CC or J, SCCR 100kA, #24 - 14 AWG max, solid and stranded)
  Category code	NLDX

  Back to top

  Environmental Product Compliance

  REACh SVHC	Lead 7439-92-1
  China RoHS	Environmentally Friendly Use Period = 50 years
  	For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”

• Output data load output