| Mechanical data | |
| Design of electrical connection | Screw connection |
| Conductor with strain relief | No |
| Cable section | |
| - Min. Cable section | |
| - Max. Cable section | 1 x 1.5 mm² |
| mechanical installation conditions | flush |
| Switch distance | 5 mm |
| Reduction factor 1 met (Y/N) | No |
| Protection circuit | inductive interference protection, Protection against polarity reversal |
| Pressure resistant (Y/N) | No |
| Tightening torque for nuts | A/F 24 max. 1800 Ncm |
| Ambient conditions | |
| Ambient temperature | |
| - Min. environmental temperature | −25 °C |
| - Max. environmental temperature | +70 °C |
| Protection class | IP67 to IEC/EN 60529 |
| Electrical data | |
| Design of control element | Normally open contact (NO) or Opener (NC) |
| Number of wire | 3 piece |
| Voltage type | DC, direct current |
| Supply voltage UB | |
| - Min. supply voltage | 10 V |
| - Max. supply voltage | 60 V |
| Switch frequency | approx. 500 Hz |
| Voltage drop Ud | approx. 1.5 V (400 mA) |
| Operating current Ie | 400 mA |
| No-load current I0 | approx. 5.5 mA (24 V) |
| Outputs | |
| Design of control output | PNP |
| LED switching conditions display | |
| LED switching conditions display (Y/N) | Yes |
| - yellow LED | |
| ATEX | |
| Explosion protection categories for gases | None |
| Explosion protected category for dusts | None |
| Dimensions | |
| Dimensions of the sensor | |
| - Length of sensor | 126 mm |
| - Diameter of sensor | M18 |
| notice | |
| Instead of nuts, a mounting clamp can be provided. | |
| Programmable by repositioning the plug-in jumper at the terminal screws | |
Hotline: 0933.911.903 (Ms.Nhi)
Mail: thietbicongnghiepltt@gmail.com
Liên hệ với chúng tôi để có thêm thông tin và giá tốt nhất!
Không có nhận xét nào:
Đăng nhận xét